Excellent Cycling Stability Research Articles

One-step chemical vapor deposition synthesis of Si NWs@C core/shell anodes without additional catalysts by the oxide-assisted growth mechanism for lithium-ion batteries.

Si NWs@C core/shell anodes for lithium-ion batteries were synthesized via a one-step environmental-pressure chemical vapor deposition (CVD) process utilizing nano-silicon and methane as raw materials. In this structure, the silicon nanowire core is obtained by controlling the temperature above 900 °C to catalyze the growth of nano-silicon particles coated with a natural oxide layer according to the oxide-assisted growth (OAG) mechanism, while the carbon as a protective coating shell is derived from methane cracking. In contrast to the conventional nanowire catalytic approach, this method obviates the addition of metal catalysts while ensuring a straightforward and scalable process. This Si NWs@C electrode displayed excellent electrochemical performance, exhibiting high reversible capacity (745.8 mA h g-1) and excellent cycling stability (91.3% after 100 cycles at 0.5 A g-1).

Electro‐Induced Self‐Reduction TiO2 in Viologen‐Based Ionogels for Multi‐Color Electrochromic Displays

AbstractReflective electrochromic (EC) technology is expected to e‐paper display field, and integrating optical reflective electrolyte as the optical reflective layer is a common strategy for constructing reflective EC devices. Compositing inorganic particles and electrolytes is one of the simplest and most efficient composite methods, but these composite electrolytes usually cannot perform well together in terms of both optical and electrochemical properties. Herein, the TiO2 nanoparticles are added to the ethyl viologen‐based ionogel (T‐EVG, one typical kind of EC/electrolyte) to have the highest visible light reflectivity and the best electrochemical performance compared with SiO2, Al2O3, and ZnO nanoparticles, which is attributed to the electro‐induced self‐reduction TiO2 produced in T‐EVG during EC cycling. Meanwhile, the corresponding EC devices can display red, green, and blue, and have high optical contrast (CIE Lab: ΔE>38), fast switching spend (<4 s, the fastest is 5 Hz), ultra‐low power density (<4.0 mW cm−2), and excellent cycling stability (>85% retained after 10 000 cycles). Finally, a simple 3×3 pixelated EC display array is prepared, and single‐ and multi‐point (including diagonal points) multi‐color display effects are realized through active‐matrix driving and high‐frequency refresh, demonstrating its application value in the high‐performance e‐paper display.

Synergistic polarization engineering of dielectric towards low-voltage high-mobility solution-processed ultraflexible organic transistors

The emerging wearable skin-like electronics require the ultra-flexible organic transistor to operate at low voltage for electrical safety and energy efficiency and simultaneously enable high field-effect mobility to ensure the carrier migration ability and the switching speed of circuits. However, the currently reported low-voltage organic transistors generally present low mobility, originating from the trade-off between molecular polarity and surface polarity of the dielectrics. In this work, the orientation polarization of the dielectric is enhanced by introducing a flexible quaternary ammonium side chain, and the surface polarity is weakened by the shielding effect of the nonpolar methyl groups on the polar nitrogen atom. The resulting antisolvent QPSU dielectric enables the high-dielectric constant up to 18.8 and the low surface polarity with the polar component of surface energy only at 2.09 mJ/m2. Such a synergistic polarization engineering between orientation polarization and surface polarity makes the solution-processed ultraflexible transistors present the ultralow operational voltage down to −3 V, the ultrahigh charge-carrier mobility up to 8.28 cm2 V−1 s−1 at 1 Hz, excellent cyclic operational stability and long-term air stability. These results combined with the ultrathin thickness of transistor as low as 135 nm, the ultralight mass of 0.5 g/m2, the conformal adherence capability on human skin and 1-μm blade edge, and the strong mechanical robustness with stable electrical properties for 30,000 bending cycles, open up an available strategy to successfully realize low-voltage high-mobility solution-processed organic transistor, and presents the potential application of QPSU dielectric for the next-generation wearable imperceptible skin-like electronics.

Manipulating 2D Membrane Interlayer Channels with Accelerated Mass-Transfer Behavior to Boost Solar Desalination.

The scarcity of fresh water necessitates sustainable and efficient water desalination strategies. Solar-driven steam generation (SSG), which employs solar energy for water evaporation, has emerged as a promising approach. Graphene oxide (GO)-based membranes possess advantages like capillary action and Marangoni effect, but their stacking defects and dead zones of flexible flakes hinders efficient water transportation, thus the evaporation rate lag behind unobstructed-porous 3D evaporators. Therefore, fundamental mass-transfer approach for optimizing SSG evaporators offers new horizons. Herein, a universal multi-force-fields-based method is presented to regularize membrane channels, which can mechanically eliminate inherent interlayer stackings and defects. Both characterization and simulation demonstrate the effectiveness of this approach across different scales and explain the intrinsic mechanism of mass-transfer enhancement. When combined with a structurally optimized substrate, the 4Laponite@GO-1 achieves evaporation rate of 2.782kg m-2 h-1 with 94.48% evaporation efficiency, which is comparable with most 3D evaporators. Moreover, the optimized membrane exhibits excellent cycling stability (10 days) and tolerance to extreme conditions (pH 1-14, salinity 1%-15%), verifies the robust structural stability of regularized channels. This optimization strategy provides simple but efficient way to enhance the SSG performance of GO-based membranes, facilitating their extensive application in sustainable water purification technologies.

MnO2 superstructure cathode with boosted zinc ion intercalation for aqueous zinc ion batteries

The simultaneous intercalation of protons and Zn2+ ions in aqueous electrolytes presents a significant obstacle to the widespread adoption of aqueous zinc ion batteries (AZIBs) for large-scale use, a challenge that has yet to be overcome. To address this, we have developed a MnO2/tetramethylammonium (TMA) superstructure with an enlarged interlayer spacing, designed specifically to control H+/Zn2+ co-intercalation in AZIBs. Within this superstructure, the pre-intercalated TMA+ ions work as spacers to stabilize the layered structure of MnO2 cathodes and expand the interlayer spacing substantially by 28 % to 0.92 nm. Evidence from in operando pH measurements, in operando synchrotron X-ray diffraction, and X-ray absorption spectroscopy shows that the enlarged interlayer spacing facilitates the diffusion and intercalation of Zn2+ ions (which have a large ionic radius) into the MnO2 cathodes. This spacing also helps suppress the competing H+ intercalation and the formation of detrimental Zn4(OH)6SO4·5H2O, thereby enhancing the structural stability of MnO2. As a result, enhanced Zn2+ storage properties, including excellent capacity and long cycle stability, are achieved.

Modification of steel slag to prepare chlorides based composite phase change materials with shape stability for high-temperature thermal energy storage

Using steel slag to prepare high-temperature (>500 °C) PCMs was an effective way to achieve its high value-added utilization as a potential heat storage medium in a variety of applications, such as solar energy storage, power peak shaving, and industrial waste heat recovery. However, the complex solid waste of steel slag might be corrosive to salt-based PCMs at high temperature. To address this issue, steel slag was firstly modified with another solid waste (i.e., CFA), which was then used to microencapsulate NaCl-KCl to prepare shape-stabilized C-PCMs in this work. Thermophysical and mechanical properties of C-PCMs were analyzed. Results showed that CFA modification greatly improved chemical compatibility between steel slag and eutectic salt through phase reconstruction. Steel slag modified with 30 wt% CFA at 1100 °C was identified as the optimum skeleton. The prepared C-PCMs containing 50 wt% salt showed a phase transition temperature of 653 °C with a high latent heat of 139 J/g and an excellent cycling stability. Additionally, its thermal conductivity reached 1.46 W/(m·K), 180 % higher than of pure salt. Compressive strength of the composite could be as high as 119 MPa, superior to other salt-based C-PCMs. A heat storage device was further designed to allow the numerical investigation of thermal performance of the prepared C-PCMs in practical conditions. Attributed by reasonable arrangement of bricks, the heat storage device possessed a uniform temperature distribution over the vertical cross-section of HTF, which contributed to a quick completion of charging and discharging process. This work could potentially lay a foundation for application of steel slag in the field of high-temperature thermal energy storage.

Exceeding Three-Electron Reactions in Polyanionic Cathode To Achieve High-Energy Density for Sodium-Ion Batteries.

Activating multielectron reactions of sodium superionic conductor (NASICON)-type cathodes toward higher energy density remains imperative to boost their application feasibility. However, multisodium storage with high stability is difficult to achieve due to the sluggish reaction kinetics, irreversible phase transitions, and negative structural degradation. Herein, a kind of NASICON-type Na2.5V1.5Ti0.5(PO4)3/C (NVTP-0.5) hierarchical microsphere consisting of abundant primary nanoparticles is designed, realizing a reversible 3.2-electron reaction with high stability. The optimized NVTP-0.5 cathode demonstrates an ultrahigh discharge capacity of 192.42 mAh g-1, energy density of up to 497.3 Wh kg-1 at 20 mA g-1, and capacity retention ratio of 94.1% after 1000 cycles at 1 A g-1. Additionally, the NVTP-0.5 cathode delivers excellent tolerance to extreme temperatures while also achieving a high-energy density of 400 Wh kg-1 (based on the cathode mass) in a full-cell configuration. Systematic in situ/ex situ analysis results confirm the multisodium storage processes of NVTP-0.5 involving successive redox reactions (V2+/V3+, Ti3+/Ti4+, and V3+/V4+ redox couples) and reversible structure evolution (solid-solution and biphasic mechanisms), which contribute to the high capacity and excellent cycling stability. This work indicates that the rational regulation of components with different functions can unlock more possibilities for the development of NASICON-type cathodes.

Environmentally benign synthesis and characterization of Bi2O3‐Sb2O3 nanocomposite: Investigation of its potential as electrode material in energy storage and generation applications

A shift to alternate energy sources is needed at the present time to address rising environmental concerns. The current research work aims to use a chemical‐free and green route to synthesize nanocomposite for their application as an electrode in the generation as well as storage of energy. Subsequently, the green synthesis of Bi2O3‐Sb2O3 nanocomposite was carried out using the leaf extract of Amaranthus viridis. The synthesized nanocomposite revealed a well‐arranged pattern of spherical nanoparticles with a crystal size of 29.43 nm and a band gap value of 2.5 eV. The hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) potentials of Bi2O3‐Sb2O3 were studied through linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS), whereas the energy storage studies were performed using cyclic voltammetry (CV) and galvanostatic charge discharge (GCD) techniques. The synthesized nanomaterial showed promising results for HER with an overpotential value of 205 mV as compared with OER, where an overpotential value of 450 mV was observed. However, excellent cyclic stability was witnessed for both reactions up to 1000 cycles. CV studies revealed an outstanding capacitance value of 348 F/g at a scan rate of 2 mV/s, whereas a specific capacitance of 269.5 F/g at a current density of 0.5 A/g was observed using GCD. The 15 h of electrode stability further endorsed the potential of synthesized material for energy‐based applications.

Proton Self‐Limiting Effect of Solid Acids Boosts Electrochemical Performance of Zinc‐ion Batteries

AbstractAt present, aqueous rechargeable Zn–MnO2 batteries have attracted widespread attention as green potential application for renewable energy storage devices. MnO2 cathode has great potential for application, but its proton reaction results in side reactions of cathode, electrolyte consumption, and dramatic pH value changes, suffering from capacity degradation. To address the issues caused by proton deficit, a proton–limited domain strategy is proposed by integrating solid acids (Sulfonic acid type polystyrene–divinylbenzene, SATP) with proton exchange reactions into MnO2. SATP can act as a new proton source increasing the amount of H+ and reducing the generation of zinc hydroxide sulfate, by–product of proton at the cathode interface, via proton exchange reactions of ‐HSO3– group. As a result, Zn–MnO2/SATP battery delivered with excellent rate performance (218.4 mAh g–1 at 2 A g–1) and high cycling stability (the retained capacity of 115.8 mAh g–1 after 500 cycles at a current density of 1 A g–1. This work provides an innovative strategy for high performance aqueous Zn–MnO2 batteries.

Amine-impregnated natural inorganic nanotubes via layer-by-layer electrostatically self-assembly approach for efficient CO2 adsorption

Developing cost-effective and high-performance solid amine adsorbents has considered as an important way to alleviate the greenhouse effect. How to precisely regulate its pore structure and surface interface characteristics, and how to cooperate to optimize the dynamic mass transfer and adsorption–desorption behavior of gas in the adsorbent are still challenging work. Herein, we demonstrated a facile and efficient approach to construct polyethyleneimine (PEI) impregnated halloysite nanotubes (HNTs) as an emerging nanocomposite for CO2 capture. Based on the natural electrostatic differences of inner and outer walls for HNTs, the hollow tubular structures of adsorbents were constructed by selective surface modification and layer-by-layer electrostatic self-assembly technology to improve the CO2 uptake capacity and cyclic stability, in which poly(sodium-p-styrene sulfonate) (PSS) and PEI were used as polyanionic and polycationic layer, respectively, to coat the inner walls of HNTs. The loading capacity of PSS-PEI composite ionic layers in HNTs and the influence of PSS polyanionic layer on PEI dispersion were specifically discussed according to the CO2 uptake capacity, adsorption heat, thermodynamics and kinetics of the adsorbents. The optimal PEI20-0.5PHNTs adsorbent exhibited a higher CO2 uptake of 0.87 mmol/g at 80 °C in the flow of 40 vol% N2/60 vol% CO2 than that of PEI20-HNTs, owing to the high amine efficiency due to the uniform dispersion of PEI in the electrostatic composite ionic layers. Furthermore, PEI20-0.5PHNTs reached 75 % of the maximum adsorption capacity at the 5th min of the adsorption process and released the most heat during adsorption at − 18.28 kJ/mol due to the presence of electrostatic composite ionic layers. PEI20-0.5PHNTs showed excellent cyclic stability with a slight loss of 7.4 %. The electrostatic self-assembled adsorbent obtained by layer-by-layer loading of PSS and PEI based on the unique surface charge characteristics of HNTs is an inspiration for the synthesis of cost-effective solid amine adsorbents for practical CO2 capture and separation.

Effect of In Situ Heating on the Growth and Electrochromic Properties of Tungsten Trioxide Thin Films

Electrochromism has emerged as a pivotal technology in the pursuit of energy efficiency and environmental sustainability, spurring significant research efforts aimed at the creation of advanced electrochromic devices. Most electrochromic materials are used for smart window applications. However, current electrochromic materials have been applied to new energy vehicles, cell phone back covers, AR glasses, and so on. More application scenarios put forward more requirements for the color of the colored states. Choosing the right color change in the application will be the trend in the future. In this work, tungsten trioxide (WO3) thin films were prepared by adjusting the in situ heating temperature. WO3 with a crystalline structure showed excellent cyclic stability (5000 cycles), electrochromic performance (ΔT = 77.7% at 633 nm, CE = 37.1 cm2/C), relatively fast bleaching/coloring speed (20.0 s/19.4 s), and the darkest coloring effect (L* = 29.32, a* = 7.41, b* = −22.12 for the colored state). These findings offer valuable insights into the manipulation of smart materials and devices, contributing to the advancement of electrochromic technology.

Sustainable and efficient oil-water separation using bio tin oxide-based superhydrophobic membrane

IntroductionSuperhydrophobic materials are considered an ideal method for oil-water separation. However, existing oil-water separation methods have the problem of manufacturing complex and toxic chemical reagents. To address the limitation, we proposed a novel approach to sustainable and efficient oil-water separation using a superhydrophobic membrane based on the Bio Tin oxide nanoparticles (Bio-SnO2 NPs).MethodsThe study involves synthesizing Bio-SnO2 NPs from the sunflower leaf extract which was natural and non-toxic and modifying textile fabric with a superhydrophobic coating (S.T.F.). Characterization techniques including SEM, FTIR, and BET analysis are employed to assess the structural and textural properties of the modified membrane.Results and DiscussionThe textile fabric was modified with a superhydrophobic coating (S.T.F.), demonstrating enhanced wettability, oil absorption capacity, and oil-water separation performance. The Bio-SnO2 NPs exhibited crystalline structures with a length of 90 nm and a diameter of 20 nm, as confirmed by SEM analysis. FTIR results revealed characteristic peaks at 3410 cm-1 and 642 cm-1, indicating the presence of hydroxyl group and Sn-O bonds confirming the successful synthesis of Bio-SnO2 NPs. BET analysis showed a substantial specific surface area of 413 m2/g and a pore volume of 0.19 cm3/g, emphasizing the textural properties. The FTIR and SEM techniques were used to study the characteristics of the textile fabric before and after modification with the superhydrophobic coat. The S.T.F. exhibited remarkable superhydrophobicity with a water contact angle of 152° and a water sliding angle of 4°. Absorption capacities for coconut oil, diesel, and hexane were found to be 70.4 g/g, 63.5 g/g, and 49.6 g/g, respectively, with excellent cyclic stability. Separation efficiency for hexane, diesel, and coconut oil was found to be 99.5, 97.1%, and 96.3%, respectively, with excellent cyclic stability. Mechanical stability test revealed superhydrophobicity retention even after an abrasion length of 200 mm. The chemical stability test indicated that the superhydrophobicity was maintained in the pH range of 3-11. Moreover, the flux for hexane, diesel, and coconut oil was 9400 L m−2 h−1, 8800 L m−2 h−1, and 8100 L m−2 h−1, respectively, highlighting the membrane’s efficient oil-water separation capabilities. These results collectively position the developed S.T.F. as a promising and sustainable solution for diverse oil-water separation applications.

Natural low corrosive phytic acid electrolytes enable green, ultrafast, stable and high-voltage aqueous proton battery

Proton is a promising charge carrier for aqueous rechargeable batteries due to its small ionic radius, fast diffusion kinetics and great abundance in nature. However, commonly-used proton battery electrolytes are strong acids, such as sulfuric acid, phosphoric acid, etc., which always leads to the notorious rapid corrosion of electrode and metal components, and thus the poor cyclability, the limited materials option and high maintenance cost. Here, we reported a new-type high-concentration phytic acid (PA) electrolytes, which exhibits marvellous superiorities including environmental friendliness, low corrosiveness, high ionic conductivity (133.3 mS cm−1) and wide working potential window (∼2.9 V) in contrast to conventional acid electrolytes. The experimental and calculation results indicated that the scarcity of free water in high-concentration PA electrolytes and the desolvation effect of the preferentially absorbed PA interfacial layer on the electrode surface work in synergy to inhibit the water activity and thus prevent electrode dissolution and side reactions. Benefiting from this, the assembled K0.2VO0.6[Fe(CN)6]0.8•6H2O (VHCF)//MoO3 button-type proton battery shows an average discharge voltage of 0.7 V with a pair of well-defined redox peak at about 1.4 V, great rate performance, excellent cycling stability (87.9% capacity retention after 1000 cycles at 5 A g−1) and superb coulombic efficiency at various current densities (1 A g−1–50 A g−1). Attributed to good anti-freezing properties of the electrolytes, the proton battery can also run normally at -60 °C and exhibit competent performance (a capacity retention of 45 mAh g−1 at 0.1 A g−1 after 540 cycles). Such green low corrosive electrolyte will be fully compatible with conventional battery fabrication process, and open brand new avenue for the development of aqueous proton battery.

Simultaneous Cu(II)-EDTA decomplexation and Cu(II) recovery using integrated contact-electro-catalysis and capacitive deionization from electroplating wastewater

The complex of heavy metals and organic acids leads to high difficulty in heavy metals separation by traditional technologies. Meanwhile, alkaline precipitation commonly used in industry causes the great consumption of resources and extra pollution. Herein, the effective decomplexation of Cu(Ⅱ)-EDTA and synchronous recycling of Cu2+ were realized by contact-electro-catalysis (CEC) coupled with capacitive deionization (CDI) innovatively. In particular, fluorinated ethylene propylene (FEP) as dielectric powders could generate reactive oxygen species under ultrasonic stimulation, realizing continuous deaminization and decarboxylation of Cu(Ⅱ)-EDTA and accelerating the totally breakage of Cu-O and Cu-N bonds. Additionally, the degradation pathway and intermediates evolution of Cu(Ⅱ)-EDTA were investigated using various characterization methods. It was confirmed that decarboxylation predominantly governed the degradation process of Cu(Ⅱ)-EDTA in CEC. During the course of treatment, the degradation ratio of Cu(Ⅱ)-EDTA reached 86.4 % within 150 min. Impressively, this strategy had satisfactory applicability to other metal combinations and excellent cycle stability. Subsequently, the released Cu ions were captured by CuSe cathode electrode through CDI. This research elucidated the degradation mechanism of persistent organic pollutant during CEC, and provided a novel approach for efficiently treating industrial wastewater containing metal complexes and advancing the exploitation and utilization of new technologies for metal recovery.

Viologen‐based host–guest supramolecule with tunable intramolecular/intermolecular electron transfer chromism and dynamic fluorescence

AbstractViologen, as a type of strong electron acceptor, is prone to undergo electron transfer (ET) and change color under external stimuli. However, due to the easy aggregation of viologen molecules, they usually suffer from poor fluorescence emission in the condensed phase. Herein, a new viologen derivative of VioCl2·2Cl (12+·2Cl) was designed and synthesized, in which the fluorescence was enhanced by introducing Me‐β‐CD to weaken the interactions between viologen molecules. Then a viologen‐based host–guest supramolecule of 12+@Me‐β‐CD was obtained by electrostatic interactions. Photo‐/chemo‐responded guest 12+ supplies 12+@Me‐β‐CD, a green and dark purple caused by intramolecular and intermolecular ET. Furthermore, 12+@Me‐β‐CD displays an additional thermal responsive purple color. The triple chromic behaviors all exhibit excellent reversibility and cycling stability. As expected, 12+@Me‐β‐CD exhibits strong photoluminescence (PL) in solid–liquid dual states, presenting an improved quantum yield (Φ) from 12+ (Φs = 0.37%, Φl = 16.74%) to 12+@Me‐β‐CD (Φs = 10.45%, Φl = 25.86%), and the fluorescence intensity can be dynamically modulated by light, heat, and acid/base vapors. The multi‐responsive chromism and tunable fluorescence of 12+@Me‐β‐CD allow for potential applications in information security and smart windows.

Engineering a Low-Strain Si@TiSi2@NC Composite for High-Performance Lithium-Ion Batteries.

The huge volume expansion/contraction of silicon (Si) during the lithium (Li) insertion/extraction process, which can lead to cracking and pulverization, poses a substantial impediment to its practical implementation in lithium-ion batteries (LIBs). The development of low-strain Si-based composite materials is imperative to address the challenges associated with Si anodes. In this study, we have engineered a TiSi2 interface on the surface of Si particles via a high-temperature calcination process, followed by the introduction of an outermost carbon (C) shell, leading to the construction of a low-strain and highly stable Si@TiSi2@NC composite. The robust TiSi2 interface not only enhances electrical and ionic transport but also, more critically, significantly mitigates particle cracking by restraining the stress/strain induced by volumetric variations, thus alleviating pulverization during the lithiation/delithiation process. As a result, the as-fabricated Si@TiSi2@NC electrode exhibits a high initial reversible capacity (2172.7 mAh g-1 at 0.2 A g-1), superior rate performance (1198.4 mAh g-1 at 2.0 A g-1), and excellent long-term cycling stability (847.0 mAh g-1 after 1000 cycles at 2.0 A g-1). Upon pairing with LiNi0.6Co0.2Mn0.2O2 (NCM622), the assembled Si@TiSi2@NC||NCM622 pouch-type full cell exhibits exceptional cycling stability, retaining 90.1% of its capacity after 160 cycles at 0.5 C.

Improved rate and cycling capability of V2O5@MoS2 nanocomposites as an advanced cathode material for rechargeable aqueous zinc-ion batteries

Owing to the benefits of higher energy density, reliable safety, and eco-friendliness, rechargeable aqueous zinc (Zn)-ion batteries (RAZIBs) are employed in energy storage applications. Nevertheless, the enhancement of potential cathodes is hindered by low reversibility and sluggish Zn-ion diffusion kinetics, causing deficient rate capability and modest cycling performance. Vanadic anhydride (V2O5) provides a potential in RAZIBs from its layered structure and superior capacity. Herein, molybdenum disulfide (MoS2) was combined into the V2O5 to form V2O5@MoS2 nanocomposites (NCs) via a simple hydrothermal method. The V2O5@MoS2 NCs enable Zn ions to migrate effectively between layers and stabilize volume changes during the insertion/extraction process. Moreover, the presence of MoS2 as a mediator in the framework produces additional defects, which leads to an enhanced storage area for Zn ions. The optimized V2O5@MoS2–2 NCs exhibited a cycling capacity of 230.74 mA h g−1 at 0.5 A g−1, superior rate performance (73.59 mA h g−1 at 30 A g−1), and excellent long-term cycling stability (108.16 mA h g−1 at 10 A g−1 over 6000 cycles), surpassing those of V2O5@MoS2–1, V2O5@MoS2–3, V2O5, and MoS2 counterparts. Such fascinating properties reveal that the proposed composite materials as a progressive cathode for RAZIBs.

Novel paddy-like Bi-Sb-Cu alloy fabricated via pulse reverse potential electrodeposition enabling high-performance sodium-ion batteries

Sodium-ion batteries (SIBs) have gained remarkable interest as cost-effective and scalable energy storage devices. Nevertheless, their further application has been significantly hindered due to the limited selection of desirable anode materials that can provide both high capacity and excellent cycling stability. Herein, we developed a hierarchical paddy-like Bi42.3Sb35.2Cu22.5 alloy anode on Cu foil via template-free pulse reverse potential electrodeposition. The Bi42.3Sb35.2Cu22.5 anode obtains a considerable specific capacity of 529.5 mAh·g−1 after 120 cycles with a remarkable capacity retention of 95.5 %, signifying a capacity loss of only 0.0375 % per cycle. However, Bi44.9Sb55.1 anodes obtained by the pulse potential electrodeposition strategy reveal a conventional irregular cluster structure, delivering only 64.5 mAh·g−1 after 100 cycles and also demonstrating inferior rate performance compared to Bi42.3Sb35.2Cu22.5 anodes. The enhanced cycling performance of the paddy-like Bi42.3Sb35.2Cu22.5 anode is primarily attributed to the introduced Cu-doped network facilitating the rapid diffusion of Na+ and also ensuring the stability of the electrode structure. Moreover, the unique paddy-like structure of Bi42.3Sb35.2Cu22.5 mitigates volume expansion-related stress and facilitates efficient charge transport through open channels. This is further corroborated by conducting CV measurements, indicating a greater capacitive contribution in the case of the Bi42.3Sb35.2Cu22.5 electrode compared to the Bi44.9Sb55.1 electrode. Additionally, SEM images show a stabilized surface morphology for the Bi42.3Sb35.2Cu22.5 electrode after cycling, demonstrating improved electrochemical performance. This work offers new insights into the development of high-performance anode materials for SIBs.

Iodine intercalation-assisted alkali activation constructs coal-based porous carbon for high-performance supercapacitors

Supercapacitors have the advantages of fast charging and discharging speeds, high power density, long cycle life, and wide operating temperature range. They are widely used in portable electronic equipment, rail transit, industry, military, aerospace, and other fields. The design and preparation of low-cost, high-performance electrode materials still pose a bottleneck that hinders the development of supercapacitors. In this paper, coal was used as the raw material, and the coal-based porous carbon electrode material was constructed using the iodine intercalation-assisted activation method and used for supercapacitors. The CK-700 electrode exhibits excellent charge storage performance in a 6 M potassium hydroxide (KOH) electrolyte, with a maximum specific capacitance of 350 F/g at a current density of 0.5 A/g. In addition, it has an excellent rate performance (310 F/g at 1 A/g) and cycle stability (capacitance retention up to 91.7 % after 30000 cycles). This work provides a method for realizing high-quality, high-yield and low-cost preparation of coal-based porous carbon, and an idea for improving the performance of supercapacitors.

A low-cost all-iron hybrid redox flow batteries enabled by deep eutectic solvents

Redox flow batteries (RFBs) emerge as highly promising candidates for grid-scale energy storage, demonstrating exceptional scalability and effectively decoupling energy and power attributes. Nevertheless, the high cost of vanadium metal hinders the continued commercialization of vanadium redox flow batteries (VRFBs), prompting the exploration of low-cost all-iron RFBs as a viable alternative. In this context, we propose an innovative deep eutectic-based all-iron hybrid RFBs. By synthesizing a deep eutectic solvent through the mixture of choline chloride, ethylene glycol, and an appropriate amount of deionized water, the deficiencies in mass transport performance of the deep eutectic electrolyte have been successfully addressed, while enhancing its conductivity. The deep eutectic solvents facilitate the restructuring of the solvent shell surrounding the negative electrolyte Fe2+, effectively suppressing its hydrolysis. Additionally, the synergistic interaction between the restructured solvation structure and the chelating ring structure formed between Fe2+ and glycine improves the deposition morphology of iron. Simultaneously, utilizing a eutectic-based positive electrolyte improves the solubility of active substances while maintaining excellent cycling stability and mass transport performance. The entire battery system exhibits an average coulombic efficiency exceeding 98 % in a 360-hour charge–discharge cycle at 10 mA/cm2. In the first 66 cycles, the coulombic efficiency remains at 100 %, and the energy efficiency approaches 54 %. This indicates that the battery system developed using deep eutectic solvents demonstrates promising applications within the same category of eutectic-based batteries.